K-Resin® KR03 process very well in injection molding, providing good cycle times and design flexibility. K-Resin KR03 alone or in blends, can be extruded into sheet and thermoformed on conventional equipment at high output rates. The favorable economics of K-Resin SBC, along with high productivity, have made possible tough clear disposable drinking cups, lids and other packaging applications. K-Resin KR03 will process on most conventional equipment, allowing the molder to run a crystal clear bottle without expensive machine modifications, special molds, different screws, or dryers. K-Resin KR03 can be blow molded in a broad range of sizes and shapes, from small pill bottles and medical drainage units, to very tall display bottles. They can also be injection blow molded into extremely high impact bottles with glasslike clarity.

Toys

Clam Packaging

Displays

Container, Cups and Lids

Extruded Sheets

Blow Bottles

SUPPLY FORM

K-Resin® is supplied in pellet form and should be kept in its original containers in cool, dry place. Avoid direct exposure to sunlight. K-Resin® can be stored in silos at temperatures well below 45℃ .

PRODUCT SAFETY

During processing of K-Resin® small quantities of styrene monomer may be released into the atmosphere. At styrene vapor concentrations below 20 ppm no negative effects on health are expected. In our experience, the concentration of styrene does not exceed 1 ppm in well ventilated workplaces - that is where five to eight air changes per hour are made. For safety information please refer to our Material Safety Data Sheet for this product.